GEPRC Sparrow GEP MX3 139mm FPV Racing Drone w/ HGLRC EVO F3 Blheli_S 5.8G 72CH VTX Runcam Micro Swift Cam PAL BNF PNP
GEPRC Sparrow is a racing FPV Quadcoprter which apply to 3 inch props, GEPRC assembly and debugging. The Sparrow have two version (PNP/BNP) for choice. The Sparrow frame kits use GEPRC brand model GEP-MX3 which is super light, low wind resistance, super strong, best apply to racing. The frame kits use full 3k carbon, body use 7075 high strength aluminum alloy parts, this will make it stronger. The motors use GEPRC brand GR1408 3500kv which specifically for racing development, the propeller use GEPRC brand GEP-P3042-3 which best apply to GR1408 motor, our team tested, the efficiency is the best. The flight controller and ESC use HGLRC brand XJB F328-TX20 which FC STM32 F303 MCU and ESCs support Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, make sure power, ESCs Maximum 28A. FPV part use Runcam Brand model Micro Swift, VTX use HGLRC brand model XJB-TX20 Mini FPV transmitter. We are offer two version PNP (without receiver) and BNF (with Frsky recevier).
Brand name: GEPRC
Item name: Sparrow GEP-MX3 FPV Racing Drone
|GEPRC Sparrow GEP-MX3 frame|
Main board: 3mm
Other board: 1.5mm
|Brushless motor||GEPRC GR1408 3500kv|
|HGLRC XJB F328-TX20|
BF3-EVO Betaflight F3
Processor: STM32 F303 MCU
Sensor: SPI Sensor MPU6000
Firmware version: Betaflight 3.15
28A 2-4S Blheli_S BB2 4 in 1 ESC:
Input voltage: 2-4S lipo battery
Constant current: 28A
Peak current: 35A
BEC output: NO
Firmware: BLheli_S 16.5
CPU: SILABS EFM8BB2 48MHZ
MOS Tube: TOP QUALITY MOSFET
Firmware: Betaflight 16.5
Support Damped Mode, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, forward and reverse.
XJB-TX20 Mini FPV transmitter
Output power: 0/25mW/100mW/250mW switchable
BAT: 7-24V, BEC 5V-3A
Video system: NTSC/PAL
Frequency: 5.8GHz 9 bands 72 channels, with Raceband: 5325-5945 MHZ
|Camera||Runcam Micro Swift 2.1mm (PAL)|
|Receiver||Frsky R-XSR (only BNF) |
|Battery||Both versions come without a battery|
|Weight||PNP without receiver: 140g (345g)|
BNF with receiver: 145g (packed weight: 350g)
1. full 3k carbon 3mm thickness.
2. 7075 aluminium alloy super strong body, so beautiful.
3. YFS 12.9 class screw.
4. HGLRC Highly integrated tower structure electronic equipment (Flight Controller: BF3-EVO Betaflight F3, ESC: 28A 2-4S Blheli_S BB2 4 in 1 ESC).
5. Runcam Micro Swift 1/3 inch 2.1mm lens FOV 160° PAL.
6. GEPRC GR1408 SPEEDX motor, Big power.
7. GEPRC GEP-P3042-3 3blade props, Best pull have 632g with GEPRC GEP-GR1048 motor.
8. You can carry a gopro camera completely.
9. Test best speed is 170km/h.
1 x GEP-MX3 frame kit
1 x Runcam micro swift
1 x PBF3-EVO Betaflight F3?
1 x 28A 2-4S Blheli_S BB2 4 in 1 ESC
1 x XJB-TX20 mini FPV transmitter
4 x GEPRC-GR 1408 3500KV (2CW + 2CCW)
6 x GEPRC GEP-P3042-3 propellers (3CW + 3CCW)
1 x Battery Strap
1 x Frsky R-XSR Receiver (only BNF)